Troubleshooting Ftp Upgrading; Troubleshooting Application File Missing Errors - H3C SR6608 Installation Manual

H3C SR6608/6604 Routers Installation Manual

9.11.3 Troubleshooting FTP Upgrading

I. Symptom
During router application upgrade through FTP, the following problems are
encountered:
Symptom 1: The CF card has no enough space. The following information
appears:
227 Entering Passive Mode (192,168,1,10,10,204)
150 "xxx" file ready to send (xxx bytes) in ASCII mode
FTP: Error Writing Local File(Screen).
Symptom 2: The file to be downloaded is not found. The following information
appears:
227 Entering Passive Mode (192,168,1,10,10,203)
550 Error: File xxx does not exist
FTP: Error Writing Local File(Screen).
Symptom 3: The configuration of the network port is incorrect. The following
information appears:
FTP: Unrecognized host or wrong IP address!
II. Solution
For symptom 1: Delete some files in the CF card or use a new CF card so that
enough space is available for the application program.
For symptom 2: Type the correct file name.
For symptom 3: Configure the network port correctly. Make sure the network port
is up and you can ping through the FTP server through the network port.
Note:
The barcode stuck on the router chassis contains information about production and
servicing. Before you return a faulty router for servicing, please provide the barcode
information of the router to your local sales agent.

9.12 Troubleshooting Application File Missing Errors

I. Symptom
When none of the main, backup, and secure application files exists, the system gives
the following message in the startup stage:
BootWare Validating...
Application program does not exist.
Please input BootWare password:
9-11
Chapter 9 Troubleshooting