Sharp Osa; Application Communication Module; (Mx-Amx2) - Sharp MX-M850 User Manual

SHARP OSA

Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to
a digital multifunction machine over a network.
When a digital multifunction machine that supports Sharp OSA is used, the operation panel controls and functions of the
machine such as scan send can be linked to an external application.
There are two types of external applications: "standard application" and "external account application". An "external
account application" is used for centralized account management of a multifunction machine on a network. A "standard
application" refers to all other applications.
APPLICATION COMMUNICATION MODULE (MX-AMX2)
The application communication module is required to use a "standard application" on the machine.
When a previously registered standard application is selected in the Web pages of the machine, the machine retrieves
the operation screen from the registered URL. Control of the operation screen is performed by the standard application,
and Scan to FTP can be executed.
Standard application setup
To enable a general application in the Web pages of the machine, click [Application Settings] in the administrator menu
frame, and then [External Applications Settings] and [Standard Applications]. Configure settings for the standard
application in the screen that appears.
Selecting a standard application
The procedure for selecting a general application that has been enabled in the Web pages of the machine is explained
below.
COPY IMAGE SEND
Ready to scan for copy.
1
Exposure
Auto
Copy Ratio
100%
DOCUMENT MANUAL
FILING FINISHING
Plain
Plain
Plain
8½x11
5.
11x17
1. 2. 6.
8½x11
8½x11 11x17
11x17 7.
3.
8½x14 11x17
4.
Original Paper Select
Auto
Auto
8½x11
8½x11
Plain
Touch the [Sharp OSA] key in the mode
Sharp OSA
select keys.
0
If no standard applications have been stored in the Web pages,
Special Modes
the key cannot be touched.
2-Sided Copy
Output
File
Quick File
71