Authentication By Login Name / Password - Sharp MX-M850 User Manual

AUTHENTICATION BY LOGIN NAME / PASSWORD

The following procedure is used to log in using a login name and password received from the administrator of the
machine or the administrator of the LDAP server.
(Different items will appear in the screen when LDAP authentication is used.)
User Authentication
Login Name
User Name
1
Password
Auth to:
Login Locally
(A)
Device Account Mode User Selection
6 12 18
User 0001
User 0003
Admin Login
User 0005
Direct Entry
User 0007
User 0009
User 0011
2
ABC
All Users
User
LDAP authentication can be used when the administrator of the server provides LDAP service on the LAN (local area
network).
User Authentication
Login Name
User Name
Password
Auth to:
Login Locally
When controlled by login name and password
OK
(B) (C)
Back
User 0002
User 0004
User 0006
User 0008
User 0010
User 0012
ABCD EFGHI JKLMN OPQRST UVWXYZ
(D)
Touch the [Login Name] key or the
key.
If the [Login Name] key is touched, a screen for selecting the
user name appears. Go to the next step.
If the key is touched, an area for entering a "Registration
No." appears [---].
Use the numeric keys to enter your registration number that
has been stored in "User List" in the system settings
(administrator). After entering the registration number, go to
step 3.
Select the user name.
(A) [Direct Entry] key
Use this key if you have not been stored in "User List" in
the system settings (administrator) and are only using
LDAP authentication.
1
2
A text entry screen will appear. Enter your login name.
To enter text, see
(B) User selection keys
Touch your user name that has been stored in "User List"
in the system settings (administrator).
(C) [Back] key
Touch this key to return to the login screen.
(D) Index tabs
All users appear on the [All Users] tab. Users are grouped
on the other tabs according to the search characters
entered when each user was stored.
22
OK
"7. ENTERING TEXT" (page 97).