Sharp MX-M850 User Manual page 34

2
3
[Example]
Make sure that the positions of the tabs correspond with the originals as shown below.
4
Loading transparency film
When loading transparency film, load the film face down in the vertical orientation with the rounded corner
at the top left.
Originals
1st sheet 2nd sheet 3rd sheet
34
Pull out the tray and attach the guide.
Move the guide plate to the triangle mark. Next, attach the
guide over the guide plate as shown.
After attaching the guide, see step 2 of
AND CHANGING THE PAPER
vertical guide.
Insert the tab paper into the tray.
Place the tab paper with the print side face down so that the tab
is to the left.
Tab paper
4th sheet
4th sheet 3rd sheet 2nd sheet
Gently push the tray in and set the paper
type to tab paper.
Change the paper type setting to tab paper as explained in
"PAPER TRAY SETTINGS" (page 80) in the System Settings.
"LOADING PAPER
SIZE" (page 32) to attach the
Bottom
Reverse
1st sheet
side
Top