Before Using The Machine; Part Names And Functions; Exterior - Sharp MX-M850 User Manual

1

BEFORE USING THE MACHINE

This chapter provides basic information about the machine. Please read this chapter before using the machine.

PART NAMES AND FUNCTIONS

EXTERIOR

(1) Finisher*
This can be used to staple output. The optional punch
module can be installed to punch holes in output.
☞
FINISHER (page 59)
*
(2) Saddle unit
The output is folded at the center. The saddle stitch
function staples output at the centerline.
☞
SADDLE UNIT
*
(3) Folding unit
This folds output.
☞
FOLDING UNIT
(4) Inserter*
Paper loaded in the inserter can be inserted into output
from the machine as covers and inserts.
☞
INSERTER (page 62)
*Peripheral device.
(1)
(page 60)
(page 61)
(2) (3) (4)
(5) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞
(6) Front cover
Open this to remove a paper misfeed from the conveyor
unit or to switch the main power switch on and off.
☞
(7) Toner cartridge installation cover
Open this cover to replace a toner cartridge.
(8) Operation panel
This is used to select functions and enter the number of
copies.
☞
6
(5) (6) (7) (8)
PLACING ORIGINALS IN THE AUTOMATIC
DOCUMENT FEEDER (page 53)
TURNING THE POWER ON AND OFF
OPERATION PANEL (page 10)
(page 18)