Originals; Placing The Original; Placing Originals In The Automatic Document Feeder - Sharp MX-M850 User Manual

3

ORIGINALS

This chapter explains how to place originals in the automatic document feeder and on the document glass.

PLACING THE ORIGINAL

PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT
FEEDER
This section explains how to place originals in the automatic document feeder.
Allowed original sizes
Minimum original size
Standard sizes
(Minimum size that can be automatically detected)
8-1/2" (height) x 5-1/2" (width)
A5: 210 mm (height) x 148 mm (width)
Non-standard sizes
(Minimum size that can be specified manually)
5-1/2" (height) x 5-1/2" (width)
140 mm (height) x 140 mm (width)
When a non-standard size original is placed in copy mode, see "SPECIFYING THE ORIGINAL SIZE" in the Copier
Guide.
When a non-standard size original is placed for fax or scanner transmission, see "IMAGE SETTINGS" in the Image
Send Guide.
Allowed original weights
1-sided scanning: 12 lbs. to 110 lbs. index (38 g/m
2-sided scanning: 16 lbs. to 110 lbs. index (52 g/m
To scan originals from 12 lbs. to 13 lbs. (38 g/m
without using "Slow Scan Mode" may result in original misfeeds.
When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.
1
Standard sizes
(Maximum size that can be automatically detected)
11" (height) x 17" (width)
A3: 297 mm (height) x 420 mm (width)
12" x 18" size paper (A3W) cannot be used.
Non-standard sizes
(Maximum size that can be specified manually)
Copy mode: 11-5/8" (height) x 17" (width)
Image send mode: 11" (height) x 31-1/2" (width)
2 2
to 205 g/m )
2 2
to 205 g/m )
2 2
to 49 g/m ), use "Slow Scan Mode" in the special modes. Scanning
Make sure an original does not remain
on the document glass.
Open the automatic document feeder, make sure that an
original is not on the document glass, and then gently close the
automatic document feeder.
53
Maximum original size
297 mm (height) x 432 mm (width)
297 mm (height) x 800 mm (width)