Authentication By Login Name / Password - Sharp MX-1800N User Manual

AUTHENTICATION BY LOGIN NAME / PASSWORD

The following procedure is used to log in using a login name and password received from the administrator of the
machine or the administrator of the LDAP server.
Please enter your login name /
password.
User Authentication
Login Name
User Name
Password
1
Auth to: Login Locally
Please select a user
to be logged in.
User 0001
User 0003
User 0005
User 0007
All Users ABCD
2
LDAP authentication can be used when the administrator of the server provides LDAP service on the LAN (local area
network).
(C)
(A)
User 0002
Admin Login
1
User 0004
25 Direct Entry
User 0006
User 0008
EFGHI JKLMN OPQRST UVWXYZ ABC
(B)
Touch the [Login Name] key or the
key.
OK
If the [Login Name] key is touched, a screen for selecting the
user name appears. Go to the next step.
If the key is touched, [---] (the registration number
display) appears in the 2-line message display.
Use the numeric keys to enter your registration number that
has been stored in "User Registration" in the system settings
(administrator). After entering the registration number, go to
step 3.
Select your user name.
(D)
(A) User selection keys
Touch your user name that has been stored in "User
Back
Registration" in the system settings (administrator).
(B) Index tabs
All users appear on the [All Users] tab. Touch a tab to
display the users whose leading initials match the tab
index.
(C) [Direct Entry] key
User
Use this key if you have not been stored in "User
Registration" in the system settings (administrator) and
have only been stored for LDAP authentication.
A text entry screen will appear. Enter your login name that
is stored on the LDAP server.
To enter text, see
(D) [Back] key
Touch this key to return to the login screen.
17
"6. ENTERING TEXT" (page 58).