Tektronix MTM400 Technical Reference page 179

MTM400 MPEG Transport Stream Monitor Technical Reference
<PI1></PI1>
Description Interface selection
<MTM400Configuration> → <Streams> → <Stream> → <PI1>
Path
Data Value Type:
Values: 0 = ASI
<BroadcastStandard></BroadcastStandard>
Description Broadcast standard selection; MPEG, DVB, ATSC
<MTM400Configuration> → <Streams> → <Stream> →
Path
<BroadcastStandard>
Data Value Type:
Values: 0 = MPEG
<DvbRegion></DvbRegion>
Description DVB region selection
(Only relevant when the DVB <BroadcastStandard> is selected.)
<MTM400Configuration> → <Streams> → <Stream> → <DvbRegion>
Path
Data Value Type:
Values: 0 = DVB
<Satellite></Satellite>
Description Non-DVB standard specialization
<MTM400Configuration> → <Streams> → <Stream> → <Satellite>
Path
Data Value Type:
Values: 0 = Satellite
Test Parameters - Parameter Reference
Numeral
1 = SMPTE
2 = Serializer 1
3 = Serializer 2
Numeral
1 = DVB
2 = ATSC
Integer
1 = DVB (DTG)
2 = DVB (Nordic)
3 = DVB (Reserved)
4 = DVB (Aus)
Numeral
1 = Terrestrail
2 = Cable
3 = ISDB-T (Partial Reception)
2−137