Functional Re-Ed Assisted - Accelerated Care Plus OMNISTIM FX2 PRO User Manual

- 34 -
E. FAST WALK
Program simulates fast walking speed at a rate of 88 strides/minute. The program is used to re-educate gait
function. Electrodes are applied to both quads while sitting with hips and knees flexed. A light resistance
using weight cuffs or exercise band can be applied. The stimulation should cause a light to moderate
contraction. Transition to standing, with weight shifting activities then to walking in place in later rehab.
User
Order in
Adjustable
Parameter Set
Parameter
Loop
(Y/N)
Y
N
N
Y

Functional Re-Ed Assisted

A. MFAC HAND CONTROL
Program provides for active assisted treatment to develop functional movement of superficial and deep muscle.
Activation of muscle with electrical stimulation occurs during functional movement. The patient should
participate to the extent possible with the functional movement by contracting during the stimulation "ON" time.
Target tissue is superficial and deep muscle groups. Bipolar set-up over agonist and antagonist muscles for target
muscle. Set intensity to elicit a grade 3-5 muscle contraction. Reduce treatment time based on muscle fatigue.
User
Order in
Adjustable
Parameter
Parameter
Set Loop
(Y/N)
Y
Y
N
N
N
Y
N
COPYRIGHT © 2004 - 2017, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED
Parameter
Name
2 PHASE DURATION
CYCLE TIME
PULSE RATE
1 TREATMENT TIME
Parameter
Name
3 CARRIER FREQ
2 BURST FREQUENCY
BURST RATE SCAN
RATE SCAN
RATE SCAN TIME
1 TREATMENT TIME
CHANNEL MODE
® 2
OMNISTIM FX PRO USER MANUAL
Adjustable
Range (unit)
40...100 (μs)
0...99 (min)
Adjustable
Range (unit)
2.0, 2.5, 4.0, 5.0,
10.0 (kHz)
0.0...250 (Hz)
0...99 (min)
Default (unit)
70 (μs)
0.68 (s)
50 (Hz)
15 (min)
Default (unit)
2.5 (kHz)
50 (Hz)
20 (%)
ON
4 (s)
15 (min)
A/B SIM.