Accelerated Care Plus OMNISTIM FX2 PRO User Manual page 28

® 2
OMNISTIM FX PRO USER MANUAL
C. IFC MOTOR
Provides symptomatic relief of superficial and deep pain with inflammation, and pain of generalized or
multi-segmental nature. Motor level stimulation activates motor and A-delta fibers causing the release of
Bendorphin systemically. Duration of relief is typically from 2 to 6 hours. Slow onset of relief usually
within 15 minutes to 1 hour. Target tissue is superficial and deep. Bipolar placement over local and distal
acu / trigger points. Quadripolar placement over area of local pain, or at involved spine segment. The
intensity should be set to elicit a moderate muscle twitch.
User
Order in
Adjustable
Parameter
Parameter
Set Loop
(Y/N)
Y 3
Y 4
N
N
N
Y 2
Y 1
D. TENS-LVPC MOTOR
Application of this program will provide symptomatic relief of superficial pain with inflammation, or pain
of a generalized or multi-segmental nature. Motor level stimulation activates motor and A-delta fibers
causing the release of Bendorphin systemically. Duration of relief is typically from 2 to 6 hours. Slow
onset of relief is usually within 15 minutes to 1 hour. Target tissue is superficial. Bipolar placement over
local and distal acu / trigger point or a spinal segmental level. Intensity should be set to elicit a moderate
muscle twitch.
User
Order in
Adjustable
Parameter
Parameter
Set Loop
(Y/N)
Y
Y
N
N
N
Y
N
E. IFC MOTOR SENSORY
Provides symptomatic relief of superficial and deep pain with inflammation, and pain of local, generalized
single or multi-segmental nature. Combines motor and sensory stimulation. Starts with motor and ends
with sensory. This is a more aggressive protocol. Duration of relief is typically from 2 to 6 hours. Slower
onset of relief usually within 15 to 30 minutes. Target tissue is superficial and deep. Bipolar placement
over local and distal acu / trigger points. Quadripolar placement over area of local pain, or at involved
spine segment. The intensity should be set to elicit a moderate muscle twitch.
This protocol is comprised of three sub-programs, as follows:
COPYRIGHT © 2004 - 2017, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED
Parameter
Name
CARRIER FREQ
BURST FREQUENCY
BURST RATE SCAN
RATE SCAN
RATE SCAN TIME
VECTOR
TREATMENT TIME
Parameter
Name
2 PHASE DURATION
3 PULSE RATE
PHASE DURATION MOD
MODULATION
RATE SCAN TIME
1 TREATMENT TIME
CHANNEL MODE
Adjustable
Range (unit)
2.0, 2.5, 4.0, 5.0, 10.0 (kHz)
0.0...250 (Hz)
Slow 45, Fast 45, Slow 90,
Fast 90, OFF
0...99 (min)
Adjustable
Range (unit)
40...300 (μs)
0.0...250 (Hz)
0...99 (min)
- 27 -
Default (unit)
2.5 (kHz)
4.0 (Hz)
50 (%)
ON
20 (s)
Fast 90
15 (min)
Default (unit)
200 (μs)
4.0 (Hz)
20 (%)
OFF
4 (s)
15 (min)
A/B SIM.