Measuring Caffeine Absorbance at 273 nm
This section describes how to measure the caffeine sample that was shipped
with your spectrophotometer. Measurement of this caffeine sample is also
used for the IQ (installation qualification) of your spectrophotometer.
1 Make sure that you are in Standard mode. The mode is indicated on the
2 Select the Fixed Wavelength task in the analysis panel's selection box.
3 Click Setup in the analysis panel to open the parameter dialog.
Agilent Cary 8454 UV-Visible Spectroscopy System Operator's Manual
toolbar of your Agilent ChemStation session.
Using your UV-Visible Spectroscopy System
Measuring Caffeine Absorbance at 273 nm
5
71