Notes:
Do not wash the filter in the dishwasher or in the washing machine.
Do not use a hair dryer to dry the filter.
Always make sure the filter is in place before operating the
appliance. Never use without the filter.
The filter should be cleaned twice a year. If visibly dirty, clean it at
once. Replace the filter if damaged.
To replace the filters, please follow instructions provided in the
separate installation guide.
STORAGE: Wrap the power cord around the main body. Insert the hook
of the adjustable tube into the side of the main body. Then, insert the
dust brush and crevice tool into the base (Fig. 19).
TROUBLESHOOTING
ISSUE
The vacuum
cleaner
won't run.
Suction is
reduced
CAUTION
Do not pick up anything that is burning or smoking, such as
cigarettes, matches, or hot ashes.
Do not use to pick up flammable or combustible liquids such as
gasoline or use in areas where they may be present.
www.KALORIK.com
POSSIBLE REASON
1. Switch button is not
on.
2. Power cord is not
firmly plugged into
the outlet.
3. Thermal protector is
activated.
4. There is too much
water in the barrel.
1. The hose or tube is
clogged.
2. Filter is clogged.
3. Floor brush is
clogged.
POSSIBLE SOLUTION
1. Turn the switch button
On.
2. Check that the plug is
inserted firmly into the
electrical outlet.
3. Allow cleaner to cool.
4. Remove some of the
water.
1. Clean tube and/or hose.
2. Clean the filter.
3. Check floor brush and
clean if necessary.
11
WFVC 43331 - 170120