Kalorik WFVC 43331 User Manual page 8

On/Off Switch
Fig. 10
Use: The water filtration vacuum cleaner can be used on dry and wet
surfaces. To use as a wet pick-up vacuum, operate the unit on the wet
surface as you would for a dry surface.
WARNING: DO NOT overfill the water tank. The unit will stop working if
the tank is full. If full, turn off and unplug the unit. Then empty the tank
and clean. Refill with clean water at the "Working Level", then plug unit
back in and continue working. DO NOT tip over.
On/Off Switch: Turn the unit on or off by pressing the power switch
located on top of the main body (Fig. 10).
Air Flow Control: Adjust the suction level by moving the pusher up or
down (Fig. 11).
Fig. 13
Floor Brush: The floor brush can be used for hard floors and carpets. Use
the switch located on top of the brush to adjust the brush to the type of
floor you are cleaning. Lower the brush for bare floors, raise it for
carpets (Fig. 12).
Adjustable Tube: Adjust the tube to the desired length by pushing the
control switch. Release the button to lock (Fig. 13).
www.KALORIK.com
WFVC 43331 - 170120
8