Cleaning And Maintenance - Kalorik WFVC 43331 User Manual

CLEANING AND MAINTENANCE

Step 1: To empty the dirty water from your vacuum cleaner, release the
latches and remove the main body and filtration assembly (Fig. 14).
Note: Make sure to remove the hose before releasing the latches.
Step 2: Pour the dirty water in a bucket or in the toilet (Fig. 15). Then,
rinse under clear water.
Step 3: Remove the sponges from the filtration assembly and rinse them
under clean water (Fig. 16).
To clean the cyclone generator: Remove the cyclone generator from
the filtration assembly and rinse under clear water (Fig. 17).
To clean the filter: Remove the filter from the main body and rinse under
clear water. Let the filter air dry before putting back into place (Fig. 18).
www.KALORIK.com
WFVC 43331 - 170120
10