14.3 Activation of the Wireless Network Connection/
WLAN Adapter
Proceed as follows to activate the WLAN adapter on the
XENTRY Tab 2:
1. Click on the Windows icon at the bottom left in the
taskbar.
2. Then on Control Panel – Network and Internet – Network
and Release Center – Change Adapter Settings.
3. Right-clicking on "Wireless Network Connection" opens a
pop-up, in which you can click on "Enable".
The WLAN adapter is then reactivated. This can be seen by
the WLAN icon at the bottom right in the taskbar.
Figure 143: Activation of the wireless network connection
62