Mercedes-Benz XENTRY Kit 2 User Manual page 43

Note: At the beginning of the initial startup process the
touchscreen cannot be used yet. For proper operation,
please use the operating buttons of the XENTRY Tab 2 or
connect a mouse or keyboard.
Figure 76: Operating buttons when setting up Windows on XENTRY Tab 2.
confirm / OK
continue
up
down
Figure 77: Selection of recovery option
Please always select the option "Reinstall Windows"
Figure 78: Confirm Windows license guidelines
Please select "Yes, I agree..."
User Guide XENTRY Kit 2, XENTRY Kit MT 2, XENTRY Connect
The language initially has to be defined:
Figure 79: Set Up Windows
The installation process starts after selecting the language;
this may take approx. 15 minutes.
A progress bar is shown:
1.
Figure 80: Progress bar during Windows installation
Subsequently, a prompt to restart the XENTRY Tab 2
appears.
2.
Figure 81: Restart XENTRY Tab 2 after Windows installation.
Confirm this message with "OK". Press the "Key" button:
The XENTRY Tab 2 shuts down afterward.
Please start the device with the
4.
power button
(> keep pressed for 1 second)
to continue with the installation
Daimler AG, Item No. 6511 9538 02, Last updated: 09/2014
Figure 82: Power button on XENTRY Tab 2
3.
4.
5.
6.
43