Components - Mercedes-Benz XENTRY Kit 2 User Manual

Table of Contents

Advertisement

The HMS 990 USB Measurement Technology is immediately
ready to operate without additional hardware installations on
the XENTRY Tab 2.
The installation of the XENTRY Measurement Technology
software already takes place during the initial startup of the
XENTRY Kit 2 and is installed by the "XENTRY Kit 2 Software
Blu-ray Disc (BD)". There is a link to the software on the
XENTRY Tab 2 desktop.
Before die XENTRY HMS 990 USB Measurement Technology
can be used, the measurement technology must first be
linked with every USB port of the XENTRY Tab 2. To do this,
proceed as follows:
1. Switch on the XENTRY Tab 2 and your XENTRY HMS 990
USB Measurement Technology. Wait until the XENTRY Tab
2 has completely started.
2. Now connect the XENTRY HMS 990 USB Measurement
Technology to the first of the three USB ports of the
XENTRY Tab 2 (on the left side under the cover flaps) and
wait until the driver has been completely installed. While
doing this, please observe the info space at the bottom
right above the taskbar.
3. Repeat step 2 for both of the remaining USB interfaces.
4. Perform a restart of the XENTRY Tab 2. Afterward you can use
the XENTRY HMS 990 USB Measurement Technology.

12.1 Components

The portable HMS 990 USB Measurement Technology is sup-
plied as an independent device. The housing is protected by a
sturdy rubber jacket. This device is designed exclusively for the
diagnostic systems. It is operated via a USB 2.0 interface. The
necessary USB cable is already pre-installed on the back of the
device.
The following components are constituent parts of the scope
of supply for the HMS 990 USB Measurement Technology:
1. HMS 990 USB Measurement Technology with USB cable
2. Power supply unit with country-specific standard electrical
power cable
3. Cable set for the supply of power by the vehicle
4. Measurement cable set
5. Activation CD (no image)
50
Figure 108: Power supply unit with country-specific standard electrical power
cable
Figure 109: Cable set for the supply of power to the HMS 990 USB from the
vehicle
Figure 107: HMS
990 USB Mea-
surement Tech-
Figure 110: HMS 990 USB measurement cable set
nology

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xentry kit mt 2Xentry connectXentry tab 2

Table of Contents