Xentry Connect; 6.1 Technical Performance Features; Interfaces On The Xentry Connect; 6.2.1 Socket For The Xentry Connect Power Supply Unit - Mercedes-Benz XENTRY Kit 2 User Manual

6 XENTRY Connect

As the successor to SDconnect, the XENTRY Connect offers
an autonomous PC core in addition to the multiplexer properties.
Figure 33: XENTRY Connect
The following points provide a brief overview of the properties
and performance features of the XENTRY Connect:
• The core element is a PC with an SSD as a robust storage
medium on which the diagnostic programs are executed.
• The power supply for the XENTRY Connect occurs:
- Directly through the vehicle's diagnostic socket (OBD)
- Via the battery in the absence of an on-vehicle supply
- With the aid of an external power supply unit included
in the delivery scope
• The connection with the XENTRY Tab 2 is carried out:
- Wireless: via WLAN; a WLAN module is installed
- Cable-based: using the Ethernet connecting cable
included in the delivery scope

6.1 Technical Performance Features

Operating system: Windows Embedded Standard 7 (32-bit)
Processor: B810 CPU (Core2Duo 2nd gen., 2x 1.6 Ghz)
RAM: 4 GB
Data storage: 256 GB SSD
Display size: 128x64 px
Battery operating
time: 40 minutes with 60% CPU load
USB interfaces: 2 x USB 2.0
Weight (incl. battery): 1.9 kg
Protection class: IP 54
Other interfaces: WLAN interface
Warranty: 3.5 years (battery warranty: 6 months)
Number of batteries: 1
WLAN standard: IEEE 802.11 a/b/g/n 2.4 + 5 GHz
Certifications: CE, UL, GOST-R, KCC, FCC, VCCI, WLAN
User Guide XENTRY Kit 2, XENTRY Kit MT 2, XENTRY Connect
The XENTRY Connect is supplied with the WLAN module
deactivated in all non-certified countries. When operated in
these countries, we recommend the use of a "micro stick"
(e.g. D-Link DWA-131/D-Link DWA-121) to nevertheless
enable you to work in the WLAN. If the D-Link stick DWA-
131/D-Link DWA-121 is not available in your country, please
contact the Diagnosis User Help Desk.

6.2 Interfaces on the XENTRY Connect

Figure 34: Connection options on XENTRY Connect
Note: Please make sure that the fan at the rear of the
XENTRY Connect is always free and that the XENTRY
Connect is not positioned lying on its fan in the vehicle.

6.2.1 Socket for the XENTRY Connect power supply unit

Used for the operation of a XENTRY Connect device via the
mains supply if it is not connected to a vehicle with the round
plug and not supplied by the vehicle battery. Only the power
supply unit included on delivery may be used.

6.2.2 USB Connections

The USB jacks are used to connect the Blu-ray drive from Mo-
TelDis, the RS232 adapter for using the SBC flash box, for USB
sticks or other USB 2.0 devices approved by Daimler AG. The
power supply delivers max. 500 mA. The connection
of a keyboard or a mouse is not supported.
Daimler AG, Item No. 6511 9538 02, Last updated: 09/2014 21