Lower Section Of The Xentry Connect Display; Background Illumination Statuses; Buttons Of The Xentry Connect - Mercedes-Benz XENTRY Kit 2 User Manual

Operational status: Working status
The icons in the upper area of the display indicate whether a
XENTRY Connect is available or has already been occupied
by another XENTRY Tab 2, or whether a defect is present.
The XENTRY Connect is ready (the icon flashes while
the device is starting)
Device is occupied and currently operating.
Initial startup (icon flashes if the device is not confi-
gured)
Defect/malfunction

6.3.5 Lower section of the XENTRY Connect display

Examples
Figure 40: Text and notes in the XENTRY Connect Display.
24
The "Device is booting" messa-
ge appears during the booting
process.
With the OBD power supply
connected yet without acti-
ve application, the message
"Device is not in use" appears
and the currently installed BD
version is displayed.
If a power supply is connected
and an application is active,
a message generated by the
application is displayed. If
the device is connected to a
XENTRY Tab 2, the name of the
connected XENTRY Tab 2 is
shown above the name of the
application (in the example,
"XENTRY Tab 2 1").
The device is not in use and is
set to standby.

6.3.6 Background Illumination Statuses

The background illumination of the display has three opera-
ting states: ON, OFF and flashing.
• Background illumination ON indicates that the device has
recently been activated or a button has recently been
pressed.
• Background illumination OFF can be attributed to two
causes:
- If nothing is shown on the display at all any longer, the
device has no power supply. The rechargeable battery is
also empty or has been removed.
- When output is shown on the display (a), the XENTRY
Connect is either in standby or (b) no XENTRY Connect
buttons have been actuated within approx. 4 minutes, or
the information has not been updated/changed within
approx. 4 minutes.
• Background illumination FLASHING indicates that the
search tone is active.

6.3.7 Buttons of the XENTRY Connect

The XENTRY Connect offers the user the following four
buttons to operate the display and a button combination to
carry out updates.
Information button
This button guides you through an information menu and
displays the following information in succession:
• Diagnosis update version: Blu-ray Disc (BD) x/xx
• Vehicle battery voltage
• XENTRY Connect serial number
• Name of the connected XENTRY Tab 2
• Fault information
• Network information
- WLAN: MAC, DHCP status
- WLAN: IP, subnet
- WLAN: gateway, status
- WLAN: SSID, encryption
- LAN: MAC, DHCP status
- LAN: IP, subnet, gateway
Function buttons
This button can be used to access functions that are relevant
to the current device status; other functions will not be offe-
red (dynamic menu).