Automatic Quick Test (Akt) - Mercedes-Benz XENTRY Kit 2 User Manual

13 Automatic Quick Test (AKT)

This chapter is only relevant if you work with the
quick test (AKT) during service reception.
13.1 Prerequisites for AKT
To perform an AKT during service reception, the diagnosis
hardware needs to be connected to the workshop network of
your facility and have an online connection.
In addition, you must have XENTRY Portal access. Further In-
formation on the XENTRY Portal can be found in the Merce-
des-Benz After-Sales Portal in the "XENTRY Portal" section.
13.2 Activation / deactivation of AKT
13.2.1 AKT activation
You can activate the AKT mode if your XENTRY Connect has
the most recent software release including the available
add-ons.
Using XENTRY Control, connect to the Diagnosis desktop on
XENTRY Connect. Click the "XENTRY AKT" icon:
Figure 138: Calling up XENTRY AKT
You will be prompted once to sign on with your user name
and password:
58
Portal and use the automatic
XENTRY
Figure 139: Login screen
Subsequently, you will be requested to select your dealer
number:
Figure 140: Selecting the dealer number
XENTRY AKT closes briefly and automatically re-starts.
XENTRY Connect is now ready to perform AKTs.
Figure 141: Display of the automatic quick test (AKT) on the XENTRY Tab 2
You no longer need a XENTRY Tab 2 or standard PC, except
in the event of possible error messages during the automatic
quick test.