Updateassist - Mercedes-Benz XENTRY Kit 2 User Manual

Figure 66: StarKeys overview
The time zone can be specified in the "Settings" tab.
Figure 67: Settings
Note: When installing the StartKey, please also specify your
time zone in the "Settings" tab.
Further information on installing the StartKeys can be found
in the chapter 5.4 Order StartKey.

10.3 UpdateAssist

UpdateAssist is started using the link
Tab 2 after the XENTRY Kit 2 Software Blu-ray Disc (BD) has
been installed.
UpdateAssist is used to provide support during updates or
recovery on the XENTRY Tab 2 and the XENTRY Connect. It
shows you how to proceed step by step.
38
Figure 68: UpdateAssist overview
You can select the device for which you want to perform an
update or recovery in the start screen. Updates are available
for both the XENTRY Connect (normal update cycle every 2
months) and the XENTRY Tab 2 (irregularly).
Note: In the case of XENTRY Connect, recovery corres-
ponds to a normal update process, as the XENTRY Connect
is cleaned up and re-implemented with each update.
Further information on the update process is available in the
chapter 11 Update & Recovery.
10.4 AddOn Center
If necessary, your system will also continue to be supplied with
so-called add-ons along with the online updates. These are
automatically downloaded in the background as soon as your
system is logged into the network. The add-ons are installed
on the XENTRY
automatically.
Note: The AddOns are also installed automatically in the
automatic quick test mode. If AddOns are available for ins-
tallation, the automatic quick test mode is interrupted tem-
porarily. After installation the automatic quick test mode
is restarted automatically. You can find more information
about this in section 13 Automatic Quick Test (AKT).
The AddOn Center tool is available to see which add-ons are
installed or if you would like to initiate installation manually. It