Motorola SVG2500 User Manual page 8

Hide thumbs Also See for SVG2500:

This document is uncontrolled pending incorporation in PDM

2 INSTALLATION

You can use the USB connection with any PC running Windows 2000, Windows XP ,

or Windows Vista that has a USB interface. The USB connection requires special

USB driver software that is supplied on the SVG2500 Installation CD-ROM. You can

upgrade your USB drivers from the Motorola Downloads page:

http://broadband.motorola.com/consumers/support/default.asp

Installing the Battery

Before you begin the installation, you must first install the battery in your SVG2500.

Please read

Safety Requirements for the SVG2500 Lithium-Ion Battery

proceeding.

1. Place the SVG2500 on a soft surface to access the bottom of the unit.

2. Pull up on the battery cover tab.

3. Align the key pins in the SVG2500 with the key slots on the battery for proper

contact.

before