Motorola SVG2500 User Manual page 5

This document is uncontrolled pending incorporation in PDM
2 INSTALLATION
The following topics provide information about installing the SVG2500 hardware:
•
Before You Begin
•
Precautions
•
Signing Up for Service
•
Computer System Requirements
•
Installing the Battery
•
Connecting the SVG2500 to the Cable System
•
Cabling the LAN
•
Installing USB Drivers
•
Connecting a PC to the SVG2500 USB Port
•
Obtaining an IP Address for Ethernet
•
Configuring TCP/IP
•
Installing the Telephone for VoIP
•
Wall Mounting Your SVG2500
For information about WLAN setup, see
Before You Begin
Before you begin the installation, check that the following items were included with
your Motorola SVG2500 Gateway:
Item
Power cord
Telephone cable (RJ-11)
Ethernet cable
USB cable
SVG2500 Installation
CD-ROM
SVG2500 Quick
Installation Guide
Setting Up Your Wireless
Description
Connects the SVG2500 to a power adapter that
connects to an AC electrical outlet
Connects to a telephone outlet
Connects to the Ethernet port
Connects to the USB port
Contains this user guide and USB drivers
Contains basic information for getting started with
the SVG2500
19
LAN.