Motorola SVG2500 User Manual page 12

This document is uncontrolled pending incorporation in PDM
2 INSTALLATION
Installing the Windows 2000 USB Driver
1. Insert the SVG2500 Installation CD-ROM in the CD-ROM drive. This CD contains
the USB drivers and must be inserted and read by the PC before you connect the
SVG2500 to the PC.
2. Connect the USB cable as shown in USB Connection. A few seconds after you
complete the USB connection, the Found New Hardware window is displayed.
3. Click Next to display the Install Hardware Device Drivers window.
4. Be sure Search for a suitable driver for my device is selected.
Motorola SURFboard SVG USB Gaeway
26