Motorola SVG2500 User Manual page 51

This document is uncontrolled pending incorporation in PDM
4 SVG2500 STATUS PAGES
Traceroute Utility
Traceroute allows you to map the network path from the SVG2500 Configuration
Manager to a public host. Selecting Traceroute from the Select Utility drop-down list
will present alternate controls for the Traceroute utility.
Field
Target IP address
or Name
Max Hops
Data Size
Base Port
Resolve Host
After entering the Traceroute parameters, click Start Test to begin the Traceroute
operation. The Traceroute results will display in the Results pane.
When done, click Clear Results to delete the Traceroute results in the Results pane.
Description
Enter the IP address or Host Name of the computer you want to
target for the Traceroute operation.
Enter the maximum number of hops that the Traceroute operation
performs before stopping.
Enter the data packet size in bytes.
Sets the base UDP port number used by Traceroute.
The default is 33434. If a UDP port is not available, this field can be
used to specify an unused port range.
Select On to list the names of hosts found during the Traceroute
operation.
Select Off to list only the hosts IP addresses.
65