Motorola SVG2500 User Manual page 34

This document is uncontrolled pending incorporation in PDM
2 INSTALLATION
Do the following to renew the IP address:
1. At the command prompt, type
address is displayed as shown, Internet access should be available.
2. Type and press Enter to return to Windows.
exit
If after performing this procedure the computer cannot access the Internet, call your
Internet Service provider for help.
Installing the Telephone for VoIP
Your SVG2500 allows you to use your cable Internet connection for VoIP telephone
service. You must contact a VoIP service provider for this feature to work with the
SVG2500. You can connect up to two standard telephone lines using your SVG2500.
Caution!
ipconfig /renew
To reduce the risk of fire, use only No. 26 or larger UL Listed or CSA Certified
Telecommunication Line Cord or national equivalent to connect a telephone line
to your SVG2500.
Contact your service provider before connecting your Motorola SVG2500 to your
existing telephone wiring. Do not connect the telephone wire to a traditional
telephone (PSTN) service.
Be sure the phone connectors are neither connected together nor connected to
wall jacks on the same network.
Use only a standard telephone. In many businesses, digital phones that connect
to a private branch exchange (PBX) do not operate with the SVG2500.
and press Enter. If a valid IP
48