Motorola SVG2500 User Manual page 112

This document is uncontrolled pending incorporation in PDM
13 TROUBLESHOOTING
10. To continue, perform
Removing the USB Driver in Windows XP
1. Select Control Panel from either the Windows Start menu or Windows Desktop
to display the Control Panel window.
2. If a Category view similar to the image under step 2 is displayed, click Performance
and Maintenance to display the Performance and Maintenance window. Otherwise,
skip to step 5.
3. Click System to display the System Properties window. Skip to step 6.
4. If a Classic view similar to the following is displayed, double-click System to
display the System Properties window:
5. Click the Hardware tab to display the Hardware page.
6. Click the Device Manager button to display the Device Manager window:
7. Double-click Network adapters.
8. Click the Motorola USB SVG Modem. The Uninstall icon displays on the window
near the top.
9. Click the Uninstall icon.
10. Close the Device Manager and Control Panel windows.
11. Perform Running the Motorola USB Driver Removal
Running the Motorola USB Driver Removal Utility
Before running the Motorola USB Driver Removal Utility, perform one of the
following to run the Windows Device Manager:
•
Removing the USB Driver in Windows 2000
•
Removing the USB Driver in Windows XP
To run the Motorola USB Driver Removal Utility:
1. Insert the SVG2500 Installation CD-ROM in the CD-ROM drive. After a short
time, a window with language choices is displayed.
2. Press Esc on the keyboard to exit the start-up screens.
3. To start Windows Explorer, click Start and select Run.
4. On the Run window, type explorer and click OK.
5. Your Windows Explorer may appear different than in the image on this page.
There are variations between Windows versions and you can configure Windows
Explorer as you like.
6. Double-click My Computer.
7. Double-click the Motorola SVG icon (D: in the image).
Running the Motorola USB Driver Removal
126
Utility.
Utility.