Motorola SVG2500 User Manual page 61

This document is uncontrolled pending incorporation in PDM
6 SVG2500 ADVANCED PAGES
Advanced IP Filtering Page
This page allows you to define which local PCs will be denied access to the
SVG2500 WAN. You can configure IP address filters to block Internet traffic to
specific network devices on the LAN by entering starting and ending IP address
ranges. Note that you only need to enter the LSB (Least-significant byte) of the IP
address; the upper bytes of the IP address are set automatically from the SVG2500
Configuration Manager's IP address.
The Enabled option allows you to store filter settings commonly used but not have
them active.
Field
Start Address
End Address
Enabled
When done, click Apply to activate and save your settings.
Description
Enter the starting IP address range of the computers for which you
want to deny access to the SVG2500 WAN. Be sure to only enter the
least significant byte of the IP address.
Enter the ending IP address range of the computers you want to deny
access to the SVG2500 WAN. Be sure to only enter the least significant
byte of the IP address.
Activates the IP address filter, when selected.
Checkmark Enabled for each range of IP addresses you want to deny
access to the SVG2500 WAN.
75