Motorola SVG2500 User Manual page 100

This document is uncontrolled pending incorporation in PDM
10 SVG2500 VPN PAGES
VPN L2TP/PPTP Page
This page allows configuration of L2TP and PPTP server options.
Field
PPP Address Range
Start
End
PPP Security
MPPE Encryption
Username
Password
Confirm Password
Preshared Phrase
Description
Specify the starting and ending IP address range so that when the
tunnel is set up, the client and server side will get their IP address
from this specified range.
Microsoft Point to Point Encryption (MPPE) is a type of link encryption
used in PPTP. Link encryption means that the data sent along this
tunnel will be encrypted.
You can choose to enable or disable MPPE encryption.
Used to authenticate between the client and the server of the tunnel
that was created between them.
Enter a user password for authentication.
Enter the password again for confirmation.
Pre shared Phrase – A phrase used to authenticate when the
SVG2500 is acting as a Layer 2 Tunneling Protocol (L2TP) server.
114