Motorola SVG2500 User Manual page 63

Hide thumbs Also See for SVG2500:

This document is uncontrolled pending incorporation in PDM

6 SVG2500 ADVANCED PAGES

Advanced Port Filtering Page

This page allows you to define port filters to prevent all devices from sending

outgoing TCP/UDP traffic to the WAN on specific IP port numbers. By specifying a

starting and ending port range, you can determine what TCP/UDP traffic is allowed

out to the WAN on a per-port basis.

Note: The specified port ranges are blocked for ALL PCs, and this setting is not IP

address or MAC address specific. For example, if you wanted to block all PCs on the

private LAN from accessing HTTP sites (or "web surfing"), you would set the "Start

Port" to 80, "End Port" to 80, "Protocol" to TCP , checkmark Enabled, and then click

Apply.

Field

Start Port

End Port

Protocol

Enabled

Description

Enter the starting port number.

Enter the ending port number.

Select TCP, UDP, or Both

Checkmark for each port that you want to activate the IP port filters.