Motorola SVG2500 User Manual page 11

This document is uncontrolled pending incorporation in PDM
2 INSTALLATION
Cabling the LAN
After connecting to the cable system, you can connect your wired Ethernet LAN.
Some samples are shown in
must install proper drivers for the Ethernet adapter. Detailed information about
network cabling is beyond the scope of this document.
Installing USB Drivers
This section describes installing the USB driver on a PC connected to the USB port
on the SVG2500. Before connecting the PC to the SVG2500 USB port, perform one
of the following procedures applicable to the Windows version you are running:
•
Installing the Windows 2000 USB Driver
•
Installing the Windows XP USB Driver
•
Installing the Windows Vista USB Driver
The SVG2500 USB driver does not support Macintosh or UNIX computers. For those
systems, you can connect through Ethernet only.
Caution!
If you have a problem installing the USB driver, remove it by performing one of the
following procedures applicable to the Windows version you are running:
•
Removing the Windows 2000 USB Driver
•
Removing the Windows XP USB Driver
When done, run the
Wired Ethernet
Be sure the SVG2500 Installation CD-ROM is inserted in the CD-ROM drive
before you plug in the USB cable.
Motorola USB Driver Removal
LAN. On each networked computer, you
Utility.
25