Connectivity - Siemens CX75 Manual

right page (95) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)

Connectivity

Settings
¢
C
¢
GPRS
(General Packet Radio Service)
C
GPRS is a method for transmitting
data faster in the mobile network.
Use GPRS and if the network has suf-
ficient capacity, you can be connect-
ed to the Internet permanently. The
network provider charges only for
the volume of data transmitted.
Some service providers do not yet
support this service.
Shown in the display:
£
¢
¤
GPRS info
Display the transmitted volume.
¢
Connectivity
T
Select function.
Switch GPRS on/off.
Activated and available.
Registered.
Temporarily interrupted.
IrDA
Activate/deactivate IrDA.
C
Your phone has an infrared inter-
b
face. With this interface, you can ex-
change data such as pictures, ring-
tones, Addressbook entries,
business cards or organiser data with
other devices which also have an in-
frared interface.
The infrared interface is on the left
side of the phone. The distance be-
tween the two devices must not ex-
ceed 30 cm. The infrared windows in
both appliances must be aligned as
accurately as possible with each
other.
Shown in the display:
IrDA activated.
¯
During transmission.
®
If IrDA is activated, standby time for
the phone will be reduced.
Settings 95