Accept Call; Reject Call; Swap Between 2 Calls - Siemens CX75 Manual

right page (33) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)

Accept call

The phone must be switched on. An
incoming call will interrupt any other
use of the phone.
Press.
C
Or
Press.
A
A phone number transmitted by the
network plus the corresponding
name (possibly with a picture) are
displayed if they are stored in the
Phonebook/Addressbook (p. 40).

Reject call

§Reject§ Press.
Or
Press briefly.
B
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
Additional information
*
Â
Press and hold to switch off
the ringtone and silent alert.
Missed call display.
Handsfree
You can put the phone down during
a call. You can then hear the caller
via the loudspeaker.
Activate handsfree
§Handsfr.§
talking.
Switch on.
C
Regulate the volume with
the joystick.
I
Deactivate.
§Handsfr.§
Warning!
Always switch off "handsfree talking" be-
fore holding the phone to your ear!
Otherwise, you will damage your hearing!

Swap between 2 calls

Establish a second connection
You can call another number during
a call.
Open call menu.
C
Hold The current call is put on
hold.
Now dial the new phone
number or select
J
Open the call menu,
C
then select
and then select the phone
number.
Calling 33
b
Default book,