Connectivity - Siemens C81 User Manual

74 Settings

Connectivity

í
T
¢ ¢
Connectivity
¢
Select function.
EGPRS
ñ Activate/deactivate
EGPRS.
EGPRS is a method for transmitting
data in the mobile network faster
than with GPRS. Use EGPRS and if the
network has sufficient capacity, you
can be connected to the Internet
permanently. Only the actual trans-
mission time is charged by the net-
work operator. Some service provid-
ers do not yet support this service.
Shown in the display:
£
Activated and available.
¢
Registered.
¤
Temporarily interrupted.
EGPRS info
Display information on connection
status.
®
Bluetooth (BT)
Bluetooth is a short-range radio con-
nection by means of which a headset
or car kit, for example, can be con-
nected without the need for wires.
Using the Sendö
tions menu for the application con-
cerned you can also use this route to
send data.
function in the op-
With SAP (SIM Access Profile) a car
phone GSM module can, for exam-
ple, use the access data from the SIM
card on your phone. There is no need
to swap the SIM card. It is possible
that SAP might not be supported by
your service provider.
Each Bluetooth device has its own
specific address and can be given a
self-explanatory name as an option.
Password protection ensures the se-
curity of a Bluetooth connection, as
does including the BT partner in a list
as a "trusted" device.
To establish a Bluetooth connection
between your phone and other Blue-
tooth devices you must activate
Bluetooth.
ñ Activate/deactivate
Bluetooth.
If Bluetooth is activated, standby
time for the phone will be reduced.
Shown in the display in standby mode
¬
Device not visible.
©
Device visible to others.
ª
Call accepted on Bluetooth
device.