Siemens CX75 Manual page 34

Hide thumbs Also See for CX75:
Table of Contents

Advertisement

left page (34)
of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
34
Calling
When the new connection is
established:
Swap between calls.
§Toggle§
Incoming calls during a call
You may need to register for this ser-
vice with your service provider and
set your phone accordingly (p. 90).
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call. You have the following op-
tions:
• Accept the waiting call in addition to
the first
Accept the waiting call,
§Toggle§
putting the current call on
hold to do so.
Always proceed as above to swap be-
tween the two calls.
• Reject the waiting call
Press.
§Reject§
Or
The waiting call is divert-
§Forward§
ed, for example, to the
mailbox.
• Accept the waiting call and end the
current call
End the current call.
B
Accept new call.
C
End call(s)
Press the End key.
B
After the
Return to held call?
you have the following selection:
You accept the call on
§Yes§
hold.
You end the second call
§No§
too.
Conference
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your ser-
vice provider or may have to be en-
abled specially.
A connection has already been
established:
Open the call menu and
C
select Hold. The current
connection is maintained.
Now dial a new number.
When the new connec-
J
tion is established...
... Open the call menu and
C
select Conference. The
held call is joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
display,
b

Advertisement

Table of Contents
loading

Table of Contents