Security - Siemens CX75 Manual

right page (101) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)

Security

Settings
¢
C
¢
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used ac-
cidentally. However, you can still be
called and you can still make an
emergency call.
Additional information
The keypad can also be directly locked and
unlocked in standby mode.
In each case:
#
Direct call
(Phone-code protected)
Only one phone number can be di-
alled (see also page 35).
¢
Security
T
Select function.
Press and hold.
Only
‚
(PIN2 or phone-code protected)
Dialling options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually be-
fore dialling.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
PIN code
For description, see page 25:
PIN control, Change PIN,
Chg.phonecode
This SIM only
(Phone-code protected)
The phone can be connected to a
SIM card once the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Settings 101
b
Change PIN2,
b