Siemens CX75 Manual page 104

left page (104) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
104 Settings
Your service provider is displayed:
§List§ Display list of preferred
networks.
Create/change entry:
or select an existing entry,
<Empty>
then select a new service
provider in the list and
confirm.
Record new service provider
(last entry in the list):
Furth.network
Select, enter the provider data and
save it.
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a differ-
ent network. This can change when the
telephone is next switched on or if another
network is selected manually.
Band selection
Select either GSM 900, GSM 1800 or
GSM 1900.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
User group
Depending on the service provider,
you can create groups with this ser-
vice. These can have access to inter-
nal (company) information, for ex-
ample, or special rates apply. Please
check with your service provider for
details.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are ob-
tained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
b
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network
configuration).
b