Download  Print this page


Table of Contents
right page (91)
of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
All calls
All calls are diverted.
Symbol in the top line of
the display in standby
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5-second intervals.
Divert occurs if a call is in progress. If
Call waiting
you will hear the call waiting tone
during a call (page 34).
Receiving fax
Fax calls are diverted to a number
with a fax connection.
Receiving data
Data calls are diverted to a phone
number with a PC connection.
Additional information
Note that the divert is stored in the network
and not in the phone (e.g. when the SIM
card is changed).
Reactivate divert
The last divert has been stored. Proceed as
with "Set divert". The stored phone number
is displayed. Confirm number.
is activated (page 32),
Call screening
Only calls from phone numbers that
are in the Phonebook/Addressbook
or assigned to a group are signalled.
Other calls are only displayed.
Any key
Incoming calls can be accepted by
pressing any key (except for
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The person you are
talking to does not hear this beep.


Table of Contents

   Also See for Siemens CX75

   Related Manuals for Siemens CX75

Comments to this Manuals

Symbols: 0
Latest comments: