Charging The Battery - Siemens CX75 Manual

Hide thumbs Also See for CX75:
Table of Contents

Advertisement

left page (18)
of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
18
Getting started
• If necessary, use the battery
3
cover
• Finally, close the cover again.
• Before removing the
RS MultiMediaCard™, carry out
the
Eject card
stuff
options menu. This prevents
any data from being lost.
• To remove the
RS MultiMediaCard™, open the
cover and press the card briefly (if
necessary, use the battery cover).
The card will pop out a little and
you can remove it. To finish, close
the cover again.
.
3
function in the

Charging the battery

Charging procedure
The battery is not fully charged
when delivered. Plug the charger ca-
ble into the bottom of the phone,
plug the power supply unit into a
mains power socket and charge for
at least two hours.
My
Y
Charging time
A flat battery is fully charged after
about 2 hours. Charging is only pos-
sible within a temperature range of
+5 °C to 45 °C (+41°F to +113°F). If
the temperature rises/falls 5°C
above/below this, i.e drops to 32°F
or rises to 122°F, the charge symbol
flashes a warning. The mains voltage
specified on the power supply unit
must not be exceeded.
Display during charging

Advertisement

Table of Contents
loading

Table of Contents