Flashforge Hunter User Manual page 46

② Disconnect Hunter
Click [Print]--[Disconnect]
5.2.14 Tool Menus
① Update Firmware
Every time when you start FlashPrint, it will automatically detect and download the
up-to-date firmware. If any update is available, a dialog box will pop up for reminding
the users to update.
Step 1: Click [Tools]--[Update
updating firmware. If software and printer are already in connection, it reminds you
cutting off the connection, and then choose
Step 2: Choose corresponding printer type and firmware version and click
the firmware updating box. After confirming the printer is in free state, the software
will automatically update the firmware.
Step 3 ： Reboot you Hunter and wait for 4-5 seconds, then you can see the update
process bar. When the update finishes, it will go back to the main interface.
Step 4：Tap [Tools]--[About]
③ On Board Preferences
When the computer and printer are in connection, click
Preferences], you can check the printer name.
④ Machine information
When the computer and printer are in connection state, click
information], you can check the machine type, machine name and firmware etc.
Hunter User Guide | www.FlashForge.com
to disconnect your PC and Hunter.
firmware]. It needs to cut off connection before
[Yes]
to check whether the updated version is right.
46
and go on to the next step.
[Tools]--[On Board
[Tools]--[Machine
400-699-1063
[OK]
in