Flashforge Hunter User Manual page 34

Method 1: Hold down the left mouse button and drag.
Method 2: Hold down the mouse wheel and scroll up and down.
Method 3: Hold down the Shift key, hold down the right mouse button and drag.
● Rotate
Click the [View] icon and then you can rotate the object by the following two
methods:
Method 1. Hold down the right mouse button and drag.
Method 2. Hold down the Shift
key, hold down the left mouse button and drag.
● Scale
Rotate the mouse wheel to enlarge or shrink the build plate.
② Set View
Allow users to view the object on the build plate. Six views are under the view menu,
that is, bottom view, top view, front view, back view, left view and right view.
Method 1: Click the the [View] button, there are six views in the drop- down list
Method 2: Click the the [Look] icon on the left, click it again and a submenu will
appear with six views for selecting.
③ Reset View
Allow users to reset views by the following two methods:
Method 1: Click the [View] [Home View]
menu and select
Method 2: Click the
[View] button on the left, click it again and you will see the
viewing options, you can click [Reset].
④ Show Model Outline
Click [View]--[Show Model Outline], it will highlight the yellow border of the
object
⑤ Show Steep Overhang
Hunter User Guide | www.FlashForge.com 400-699-1063
34