Wire Doors
For each board node to be used for controlling a door, as indicated in the completed Installation
Worksheet, make the following connections.
NOTE: Doors can be wired to the MAIN BOARD or to expansion boards, including
both DOOR BOARDs and INPUT OUTPUT BOARDS.
NOTE: ACS6000 Output Ratings for the ACS6000 Main Board
© 2017 Brivo Systems LLC. All rights reserved.
Figure 14 - Wire Doors for Wiegand Readers
•
Two (2) reader ports, 12V, 350mA each
•
Two (2) selectable wet contacts, 12VDC, 350mA each
•
Four (4) dry contacts are 28VDC, 6A each
Brivo ACS6000 Installation Manual
P-MAN-PUB-ACS6000 Installation Manual
26