Table of Contents
Advertisement
CODING THE ROOM KEYS
The room keys must be coded as the same as the room numbers. When there is a call from the door
panel or other units, room rings as the coded number.
Example; If the Room Number is 1, number 1 key is ON and the other keys are OFF.
SOLVING THE PROBLEMS
1.
NO VOLUME OR TOO LOW VOLUME
Please check the Volume Level Settings.
NOISE IN THE VIDEOPHONE
Please check the telephone intercom line connections.
2.
NO RING TONE VOLUME OR TOO LOW
Please check the Ring Volume Level.
3.
DISPLAY PROBLEMS;
You can adjust the screen with the Contrast and the Brightness buttons.
info@multitek.com.tr
E-mail:
Web: www. multitek.com.tr
8
Advertisement
Table of Contents
Need help?
Do you have a question about the MB-41 MULTIBUS and is the answer not in the manual?