Wireless | Mac Acl - Gemtek Systems P-780 User Manual

P-780 User's Guide v1.2
By default, four WEP keys are all set to "aaaaa". They can be modified according to
real need.
Figure 43 – Edit WEP Key

Wireless | MAC ACL

Use the MAC ACL service to control the default access to the wireless interface of the P-780 or
define special access rules for mobile clients. Configure the ACL using the Wireless | MAC ACL menu:
Figure 44 – MAC ACL Service
Radio – Two wireless interfaces wlan1 and wlan2 can be selected for each radio's MAC ACL rules.
Only AP mode has the MAC ACL service. The wireless interface whose mode is
Bridge hasn't MAC ACL settings.
Policy Setting – click the edit button to choose Allow, Deny or disable the access control service on
device. By default the ACL service is disabled and all wireless clients connecting to the P-780 are
allowed (no ACL rules are applied to the wireless clients).
Select Allow means only the wireless clients whose MAC are listed in the MAC List would be
permitted to access this AP. Other wireless client cannot access this AP.
Select Deny means only the wireless clients whose MAC are listed in the MAC List would be
prevented from accessing. Other wireless clients can access this AP.
Select Disabled means no ACL service.
Gemtek Systems
February 7, 2005
Page 42 of 60