Gemtek Systems P-780 User Manual page 31

P-780 User's Guide v1.2
DHCP Relay
To route DHCP through the external server, enable the DHCP Relay service.
Figure 27 – DHCP Relay settings
Server IP: enter the IP address of the external DHCP server.
Change status or leave in the default state if no editing is necessary and click the Save button.
Figure 28 –Apply or Discard DHCP relay Settings
For each change of settings, the P-780 needs to be restarted to apply all settings changes when
clicking Apply Changes. Request for reboot server appears:
Figure 29 – Reboot information
Reboot – Click the button to restart the server and apply the changes.
If there is no other setting needed to be modified, click the Reboot button for
applying all modifications.
And if there are still other setting modifications needed, go ahead to finish all
changes and then click Reboot button to restart and apply all settings together.
Gemtek Systems
February 7, 2005
Page 32 of 60