System; System | Security; System | Snmp - Gemtek Systems P-780 User Manual

P-780 User's Guide v1.2

System

System | Security

Use the System | Security service to configure the name and password administrator:
Figure 49 – system security settings
User Name – administrator username for access to P-780 (e.g. web interface, CLI mode) [1-32
symbols, spaces not allowed].
Old Password – old password value.
New Password –new password value used for user authentication in the system [4-8 characters,
spaces not allowed].
Confirm Password – re-enter the new password to verify its accuracy.
Save – click to save new administrator settings.
Default administrator logon settings are:
User Name: admin
Password: admin01
Password length is from 4 to 8 characters.

System | SNMP

SNMP is the standard protocol that regulates network management over the Internet. To
communicate with SNMP manager you must set up the same SNMP communities and identifiers on
both ends: manager and agent.
Use the System | SNMP menu to change current SNMP configuration.
Gemtek Systems
February 7, 2005
Page 45 of 60