P-780 User's Guide V1.2 February - Gemtek Systems P-780 User Manual

P-780 User's Guide v1.2 February 7, 2005
Figure 45 – MAC ACL settings
You must create MAC List to work with Policy setting. The access control list is based on the
network device's MAC address. In the MAC ACL Configuration table, you only need to specify the
MAC address of wireless client. Click the Add button to create a new MAC entry:
Figure 46 – Add MAC entry
MAC Address – enter the physical address of the network device you need to (MAC address) The
format is a list of colon separated hexadecimal numbers (for example: 00:AA:A2:5C:89:56).
Save – click the button to save the new MAC entry.
Figure 47 – Apply or Discard MAC ACL Configuration Changes
Apply Changes – to save all changes made in the interface table at once.
Discard Changes – restore all previous values.
For such each change of settings, the P-780 needs to be restarted to apply all settings changes when
clicking Apply Changes. Request for reboot server appears:
Gemtek Systems Page 43 of 60