Gemtek Systems P-780 User Manual page 34

P-780 User's Guide v1.2 February 7, 2005
16 dBm
4.5 dBi
Figure 34 – Apply or Discard Basic Wireless Settings
Radio – specify which wireless interface of P-780 is shown
Channels – select the channel that the access point will use to transmit and receive information. If
one channel is defined, it acts as default channel. Channels list will vary depending on selected
band. Multiple frequency channels are used to avoid interference
between two radios of this AP, and between nearby access points. If you wish to operate more than
one access point in overlapping coverage areas, we recommend a distance of at least four channels
between the chosen channels. For example, for three Access Points in close proximity choose
channels 1, 6 and 11 for 11b/g or channels 36, 40 and 64 for 11a.
Band – working bands on which your radios are working.
Gemtek Systems Page 35 of 60