Connect To The Power Source And Local Network - Gemtek Systems P-780 User Manual

P-780 User's Guide v1.2
Please read the description sheet in Waterproof RJ45 Connector package carefully
before you do the assembly.
Step 5 Insert the the Ethernet twist cable to the LAN port connector on the back of the P-780
Bottom Cover and screw down the nut.
Step 6 Connect two RF connectors to the Antennas by Jump RF cable with waterproof N-type
plug.

Connect to the Power Source and Local Network

Step 1 Connect the Ethernet cable from the P-780 route to a IEEE802.3-2003 compliant Power
source Equipment, Such as E-120 POE HUB,E-820 POE Switch from Gemtek Systems.
Step 2 If you use the E-120 POE HUB, please connect the P-780 LAN port to the
PWR-LAN OUT port of E-120 and connect the E-120 LAN-IN port to the Switch or hub in
the local network.
Figure 6 – Connecting P-780 to Power source and network by PoE HUB
Gemtek Systems
February 7, 2005
Page 16 of 60