Gemtek Systems P-780 User Manual page 49

P-780 User's Guide v1.2
Figure 62 – Firmware Upgrade
Click the Upload and then the follow appears. Specify the full path to the new firmware image and
click the Upload button:
Figure 63 – Firmware Upgrade
To flash the uploaded firmware image to upgrade the firmware is done by click the Upgrade button.
Please make sure the firmware is correct for P-780. Otherwise the upgrade will be
failed.
Figure 64 – Device Statistics
Do not switch off and do not disconnect the P-780 from the power supply during the
firmware update process because the device could be damaged. It is best to use
the Ethernet connection (not wireless) for the firmware update process.
Gemtek Systems
February 7, 2005
Page 50 of 60